Loading ...
Loading ...
Loading ...
SETTINGS (Menu) Item Setting values Default Explanation
User Interface
Front Panel Operation
Off / On On
Enables/disables operation using the front panel (other than the
power key).
Remote
Sensor
Off / On On
Enables/disables operation using the remote control. When this is
“Off”, the unit can still be operated by other means.
ID
ID1 /
ID2 ID1
Changes the ID of the remote control from which the unit receives
signals.
To change the ID of the remote control, set it as follows.
Set to ID1: on the remote control, hold down f and PRESET
1
at the same time for 5 seconds.
Set to
ID2: on the remote control, hold down f and PRESET
2
at the same time for 5 seconds.
Access device Indication
- -
Lights the LED of the device currently being used for operation via
a web browser.
Bluetooth
Bluetooth
Off
/ On On Enables/disables the Bluetooth function.
Audio Receive
Standby
Off / On On
Enables/disables the feature allowing the unit to be turned on by
Bluetooth devices (Bluetooth Standby).
Private Mode
Off / On Off
Sets whether or not the unit responds to searches other than from
the paired Bluetooth device. When this is “
On”, the unit does not
respond to searches.
Disconnect
- -
Terminates the Bluetooth connection between the Bluetooth device
and the unit.
Audio Send Transmitter
Off /
On Off Enables/disables transmission of Bluetooth audio.
Other Setup
Auto Power Standby
Off / 20min / 2h /
4h / 8h / 12h
Off
Sets the unit to be automatically set to standby mode when there
are no operations for a specified amount of time.
When this is set to 20min
, the unit will only be set to standby mode
automatically if there is no input signal during the 20 minutes
without any operations.
Fan Mode
Off / Auto / On Auto Sets cooling fan operation to “Off”, “Auto” or “On”.
Memory Guard
Off / On Off
Protects the settings of the unit and prevents them from being
modified.
Network Info
- -
Displays network information about the unit, such as its MAC
address.
En
31
Loading ...
Loading ...
Loading ...