Loading ...
Loading ...
Loading ...
SETTINGS (Menu) Item Setting values Default Explanation
MAC filter
Mode
Off / On Off
Enables/disables the MAC address filter function.
Note
When enabling the MAC address filter, be sure to check the MAC
addresses carefully before clicking “
APPLY
”. Configuring the filter
incorrectly may result in the unit becoming inaccessible. If this happens,
the unit must be restored to the default settings (p.36).
Network Standby
Off / On / Auto Auto
Enables/disables the feature allowing the unit to be turned on by
network devices (Network Standby).
Backup / Recovery
- -
Saves the unit’s current settings to a PC or loads them back from a
PC.
Note
▪ The backup does not contain user information (such as user accounts
and passwords) or unit-specific information (such as its IP address).
▪ Do not operate the unit during the recovery process (loading the
settings back from a PC), as this may result in the incorrect recovery of
the settings. When the recovery finishes, click “OK” to set the unit to
standby mode.
Firmware
- - Updates the unit’s firmware from the web browser.
Licenses
- - Displays license information about the software used by the unit.
* After configuring the network settings, it may be necessary to access the unit again or restart the browser.
SETTINGS2
SETTINGS (Menu) Item Setting values Default Explanation
Sound
Enhancer
Off / On On
Enables/disables the Compressed Music Enhancer feature
(p.42
).
Bass Extension
Off / On Off
Enables/disables extension of the low-frequency range of the
frequency band of the speakers’ playback. When this is “
On”, you
can enjoy rich bass sounds as if you are using significantly larger
speakers.
Monaural Downmix
Off
/ On Off
Enables/disables a mode that plays back stereo signals as
monaural audio.
Direct
Off / On Off
Enables/disables Direct playback. When this is enabled, audio is
played back without being passed through the DSP.
Ultra Low Jitter PLL
Level1-3 Level2
Sets the strength of the jitter removal applied to the audio input
being played back, in order to adjust the audio quality.
When the level is set high, the jitter removal is more effective, but
the sound is likely to cut out.
When the level is set low, the jitter removal is less effective, but the
sound is less likely to cut out.
En
29
Loading ...
Loading ...
Loading ...