Loading ...
Loading ...
Loading ...
12 English
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone (1) by lifting it up.
1
2. Take off the cover (2) w/harness with a flat-
blade screwdriver (-).
2
3. Press the locking tab and separate the Wire
Connector.
When reassembling it, be sure to connect
the wire harness.
If it is not connected, the Flex Room does
not work.
4. Remove 1 hex head bolt from each side with a
socket wrench (10mm).
CAUTION
5. Lift up the Flex door from the rails.
Putting too much food into the freezer
drawers can prevent the freezer from
closing completely and can cause frost
build-up.
RE-ASSEMBLING THE FLEX
DOOR
To reattach the flex doors, assemble parts in
reverse order.
Be sure to connect the Flex Door Wire
Connector.
If it is not connected, the Flex Room does
not work.
CAUTION
CAUTION
RF22KR_DA68-02897B-04_EN.indd 12 2018-07-05 12:22:20
Loading ...
Loading ...
Loading ...