Loading ...
Loading ...
Loading ...
HOW TO START
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in ON
position. Personal injury or
damage could result.
• The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury°
, DO NOT use outlets above
counters. Damage from cord to
items in surrounding area
could occur.
J!J!ll IIIII I i iiiiiiiii1,,,,,11
Cord
Rewind
1. Pull cord out of
canister to desired
length,The cord
will not rewind until
the cord rewind
bar is pushed°
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. if
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con-
tact a qualified electrician to install the prop-
er outlet. Do not change the plug in any
way.
2. Plug the polarized power cord into a 120
Volt outlet located near the floor,
To rewind: Unplug
the cleaner. Hold
the plug while
rewinding to pre-
vent damage or
injury from the
moving cord° Push
cord rewind bar.
Pile Height
Indicator
Handle
Release
Pile Height Pedal
(Some Models)
3. Lower wand from upright position by
pressing on the handle release pedal,,
E CAUTION ...............................
DO NOT leave the Power-Mate ®
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
4. Select a pile height setting by pressing
the small pedal on the rear of the Power-
Mate®°The pile height setting shows on the
indicator. See SUGGESTED PILE HEIGHT
SETTINGS_
Attention: Refer to your carpet manufac-
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the Power-Mate ®agitator
turned off, to prevent carpet damage.
= -- =
= -- =
L, -- /d
\--._/]
_OFF
FLOOR
\ ._
5. Select a switch
position on the
handle°
OFF
FLOOR - turns on the canister motor only.
CARPET - turns on both the canister and
the Power-Mate ®motors_
NOTE - When this switch is in the FLOOR
position, the headlight and dirt sensor
(some models) DO NOT function since no
electricity flows to the Power-Mate ®.
Loading ...
Loading ...
Loading ...