Loading ...
Loading ...
Loading ...
Step 0 Select the Signal
ON
SIGNAL
OFF
Press ON or OFF for the desired signal option. ON provides an audible signal upon the
completion of a cycle. OFF provides no audible signal.
OFF PREWASH
STAINS
h_:Aยข-_' REGULAR
_: Rotate the control
dial clockwise to the
desired cycle.
NC'R14A[
Step 0 Select Cycle
REGULAR
Prewash 69 minutes
Stains 59 minutes
Heavy
Normal
Light
NORMAL
DELAY 2 - 8 hours
HOURS
The cycles located within the "Regular" area of the dial are used with most loads.
56 minutes
39 minutes
33 minutes
33 minutes
39 minutes
Use for heavily soiled loads. Use 1Fetimes the usual amount of detergent
because the washer drains and refills with fresh water.
Use with STAIN CYCLE option button for heavily soiled, stained loads.
NOTE: The STAINS and HEAVY settings are not recommended for use with
Delicate or Hand.Washable loads.
Use for cleaning heavily soiled loads.
Use for cleaning moderately soiled loads.
Use for cleaning lightly soiled loads.
QUICK cycle setting on the left side of the control offers the opportunity to easi-
ly set the washer for a quick cycle time tBr lightly soiled loads.
NORMAL cycle setting on the left side of the control provides a NORMAL
cycle when setting the washer for a delay start.
Allows the start of the NORMAL cycle to be delayed for up to 8 hours. Set th_
contro! dial on the desired number of delay hours, press the START/STOP but
ton. NOTE: If the washer door is opened during the delay time, press th
START/STOP button again.
4
Loading ...
Loading ...
Loading ...