Loading ...
Loading ...
Loading ...
Page 17
DANGER
Always switch o and disconnect power before replacing the lights. Failure to do so may cause
serious injury. Please be aware that the light bulb may retain heat for a short period of time after
being switched o.
Replacing the Lights
6. Cleaning and Maintenance
Step 2
Gently push light holder down, turn light bulb anti-clockwise,
pull the light bulb down and remove it from the light holder.
Step 3
Gently push light holder down. Insert a new light bulb by
lining up the pins of the light bulb with the larger holes inside
the light holder. Once the pins are in place, turn clockwise to
secure the light bulb.
NOTE: Light bulb should sit ush after being installed. Do
not over push the lamp holder as it may cause the light bulb
to stick out. If this has occurred, please remove light bulb and
push the light holder back into place and repeat steps 2 and 3.
Step 1
Remove the lters from the rangehood.
Loading ...
Loading ...
Loading ...