Loading ...
Loading ...
Loading ...
4
Installing the washing machine water inlet and waste outlet
Confirm if the washing machine waste inlet needs to be moved from right to left before securing the unit to
the wall. If they do need to be changed see page 6 of these installation instructions.
1. Cold water washing machine required, identify cold water 3 way ball valve confirm that the valve is shut
horizontal and remove the ¾” cap and seal. (Keep the cap in a safe location in case you need to remove
the washing machine at a later date). Feed the cold water hose from the washing machine through the
white plastic washing machine waste inlet to the 3 way ball valve, confirm the seal is okay and then
connect them together.
2. Hot water not required, then checks the cap only and make sure it is tight and that the 3 way ball valve is
in the off position.
3. Hot water washing machine required, identify the cold water 3 way ball valve confirm that the valve is
shut horizontal and then remove the ¾” cap and seal. (Keep the cap in a safe location in case you need
to remove the washing machine at a later date). Feed the hot water hose from the washing machine
through the white plastic washing machine waste inlet to the 3 way ball valve, confirm the seal is ok then
and connect them together.
4. Washing machine waste hose connection through the white plastic washing machine waste inlet and make
sure that the hose is as far down the hose as possible and then to prevent the washing machine waste
hose from coming loose use the cable tie from the installation kit to fasten the hose firmly to the white
plastic washing machine waste connector. (see next page for picture)
Important:
Ensure the washing machine outlet hose is correctly fitted at both ends and that the spring clips are firmly in
place to prevent leaks.
Operating Instructions
1. To use the washing machine from the mains water
supply, simply turn the washing machine 3 way
ball valves knob quarter turn valve on.
2. To isolate the washing machine from the mains
water supply, simply turn the washing machine 3
way ball valves knob quarter turn off. This will
isolate the washing machine from the mains water
supply but still allow water to flow through the
laundry tub tap.
Cable tie
Washing machine hoses
3 way ball valve
3 way ball valve caps
1
2
Loading ...
Loading ...
Loading ...