Loading ...
Loading ...
3
Installing the Supertub
Confirm if the washing machine waste inlet needs to be moved from right to left before securing the unit to
the wall. If they do need to be changed see page 6 of these installation instructions.
1. Fit the four adjustable feet supplied to the bottom
of the cabinet and adjust to align with worktop or
washing machine height. Use the lock nut to
secure the feet into position. Tilt laundry tub
slightly to assist with access. Check the top of
the laundry tub with a spirit level to ensure that it
is level and check that the cabinet does not
“rock” confirm that the door operates correctly.
Locknut Bottom of the unit
2. Line up the laundry tub to the installation and confirm enough room, if necessary remove the skirting
board at the require distance 560 mm this will allow the unit to sit flush against the wall. (Check with your
local council for building regulations). Remove the laundry tub away from the wall.
3. Remove the transit cable tie‟s holding the 3 way ball valve in position.
4. Fit the tap ware to the tub using the supplied
fittings. Connect the two flexible hoses onto the
body of the tap ware from the underside; ensure
that the flexible hoses are fitted to the hot and
cold correctly. Hand tightened and then finished
with a quarter turn only.
5. Position the laundry tub and cut the house waste pipe (which should already be installed) to the exact
height. The final height will depend on the waste trap dimensions.
6. Fasten the laundry tub to the wall through any of the holes in the rear flanges. Alternative fastening can
be achieved through the floor. Confirm that the drawers operate correctly.
7. Connect the flexible hoses from the 3 way ball valves to the hot and cold mains wingbacks and connect
the waste system to the laundry tub.
8. Test the laundry tub for leaks. Check the tap ware, washing machine caps and the waste system.
9. Seal the laundry tub to the wall using suitable approved sealant. (Check with your local council for
building regulations).
Hot water
hose only
Loading ...
Loading ...
Loading ...