Simpson Cleaning PS60982-S USE AND CARE MANUAL

Loading ...

Adding the pump breather cap

(if applicable)

A RED shipping plug is in the pump that must be replaced with a BLACK breather cap.

The plug is easy to replace with the following steps:

1. Using a bladed screw driver, remove the RED shipping plug from the top of the pump.

2. Hand thread the BLACK breather cap into the pump.

3. Snugthecapwithyourngers.

RED shipping plug

BLACK breather cap

Page 7

UNPACKING

ASSEMBLY

Follow the steps outlined in this section to unpack and assemble your pressure washer.

Ifyouhaveanyquestionsregardingtheunpackingorassemblyofyourpressurewasher,

please have your model number and serial number ready, then contact customer support at

1-877-362-4271 or email [email protected].

1.Placetheshippingcartononasolid,atsurface.

2. Carefully cut the top of the carton open.

3. Carefully cut each corner of the carton from top to bottom.

4.Layeachsideofthecartonatontheground.

5. Remove the contents of the carton.

Install knob-style handle

Slide the handle onto the frame. Hold

the front dashboard (if equipped)

against the frame then secure them with

the included knobs and bolts.

Loading ...

Simpson Cleaning PS60982-S Pro Series 50-State 3700 PSI at 2.5 GPM HONDA® GX200 with AAA® Triplex Pump Cold Water Professional Gas Pressure Washer