Loading ...
Loading ...
Loading ...
Lift the Water Tank with both
hands using the Handle to
remove the humidier from
the Base.
Remove Rotating Mist Nozzle
prior to lling the Water Tank.
Turn the Water Tank upside down
and remove the Tank Cap by
turning it counter clockwise.
21
3
4
5
6
WARNING: Replace the Tank
Cap by rmly turning clockwise
until tight. Turn the Water Tank
upright and check the Tank Cap
for leaks. If any water drips,
remove the Tank Cap and retighten.
WARNING: DO NOT place
Water Tank on the humidier Base
if the cap is leaking.
Lift the Water Tank with both
hands using the Handle and
replace on the humidier base.
Make sure to follow the shape
of the Water Tank and the hu-
midier Base, so that the tank
sits level and ush to the Base.
Ensure the tank is rmly seated.
4
Filling The Water Tank
WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER ll the Water Tank from the top of the unit. Follow Water Tank
lling instructions in #4.
Filling the Water Tank: Use clean,
cool, tap water.
WARNING:
DO NOT
use extremely cold water,
since it may temporarily reduce the
mist output.
WARNING:
NEVER
ll with hot/warm water or use
additives as this could damage the
unit and void the warranty.
WARNING:
If you have hard
tap water use our Humidier
Demineralization (hard water) Filters
(available at www.Air-Innovations.com)
or use ONLY ltered, distilled, cold
boiled or bottled water.
Attach the Rotating Mist Nozzle
to the top of the Water Tank by
snapping into place for desired
use as pictured.
7
Loading ...
Loading ...
Loading ...