Smart Electrician Z-20000-DT-2 20000 Lumen LED Tripod Work Light

User Manual - Page 3

For Z-20000-DT-2.

PDF File Manual, 3 pages, Read Online | Download pdf file

Z-20000-DT-2 photo
Loading ...
Loading ...
CUSTOMER SERVICE
For question/comments, please contact at 1-855-508-3883.
This product is guaranteed against failure due to the factory defects in materials workmanship for five years
from the date of purchase. This warranty does not cover normal wear of parts or damage resulting from any
misuse of the product.
Important: This warranty is only valid if the product has been purchased through an authorized reseller. Proof
of purchase is required for repair or replacement. Misuse of the product includes but is not limited to: washing
the product, using in extreme weather conditions, opening the product, or altering the product.
5 YEAR LIMITED WARRANTY
SKU NO.: 370-5457
MODEL NO.: Z-20000-DT-2
3
CAUTION
LIGHT OPERATION
CARE AND MAINTENANCE
1. WARNING - Always make sure that the work light is unplugged and cooled down before attempting to clean it.
2. Using a soft cloth, clean the fixture using a mild, non-abrasive glass cleaner. DO NOT use solvents. DO NOT use cleaners
containing abrasive agents. NEVER spray liquid cleaner directly onto the light.
3. STORAGE - Always allow the work light to cool down completely before storing. Store in a safe place, out of the reach of
children.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The work light will not
operate.
The power is off.
The switch is off.
Improper voltage or power supply.
Check to ensure the power supply is on.
Check to ensure the switch is in the ON
position.
The work light will only operate on
standard household 120V AC/ 60 Hz power.
1. While ON, avoid touching the product’s surface(s) during adjustments or in normal operation.
2. Avoid long duration of direct eye contact with light while in operation.
3. Integrated LED’s never need to be replaced.
4. Suitable for use(s) around wet locations and in operating environments ranging between
-4° to 113°F (-20°C to 45°C).
Press ON/OFF button located on the back of each light.