Loading ...
Loading ...
Loading ...
Page 7www.123filter.com
| (678) 261
A.
Source water from Feed Water Adapter
C.
Waste water from Flow Restrictor
E.
RO water from stage 5 “T” fitting
F.
When the drinking faucet is opened, RO water from the tank passes through E and G
water to the drinking faucet
Before you begin the installation, it is highly recommended that you watch the
video “
iSpring Reverse Osmosis Installation”
Note:
If you plan on mounting/hanging the system, it is highly recommended to
include supports under each of the bottom three housings. Supports under the
housings will take the water weight off the housin
decay over the years.
Note: Steps 1 –
7 are independent, and can be performed in any order.
| (678) 261
-7611 | Support@123Filter.com
Sample Installation
Figure 5
Source water from Feed Water Adapter
→ B.
Source water to 1st stage water inlet
Waste water from Flow Restrictor
→D. Waste water to Drain Saddle/drain pipe
RO water from stage 5 “T” fitting
→ F. RO water to Storage Tank
When the drinking faucet is opened, RO water from the tank passes through E and G
Installation Steps
Before you begin the installation, it is highly recommended that you watch the
iSpring Reverse Osmosis Installation”
on YouTube.
If you plan on mounting/hanging the system, it is highly recommended to
include supports under each of the bottom three housings. Supports under the
housings will take the water weight off the housin
g threads, and ensure the thread strength does not
7 are independent, and can be performed in any order.
Source water to 1st stage water inlet
When the drinking faucet is opened, RO water from the tank passes through E and G
→ H. RO
Before you begin the installation, it is highly recommended that you watch the
If you plan on mounting/hanging the system, it is highly recommended to
include supports under each of the bottom three housings. Supports under the
g threads, and ensure the thread strength does not
Loading ...
Loading ...
Loading ...