Loading ...
Loading ...
Loading ...
15
RANGE HOOD CARE
Cleaning
IMPORTANT: Clean the hood and grease lters frequently
according to the following instructions. Replace grease lter
before operating hood.
Exterior Surfaces:
IMPORTANT: To avoid damage to the exterior surface, do not
use steel wool or soap-lled scouring pads.
Always wipe dry to avoid water marks.
Cleaning Method:
■ Liquid detergent soap and water, or all-purpose cleanser
■ Wipe with damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
Metal Grease Filter
1. Open the panel. Grasp panel at the front corners and pull
down to disengage the two catch pins from the spring
catches. The panel is attached at the rear and will rotate
down.
2. Remove each lter by pulling the spring-release handle and
then pulling down the lter.
3. Wash metal lter as needed in dishwasher or hot detergent
solution.
4. Reinstall the lter by making sure the spring-release handles
are toward the front. Insert metal grease lter into upper
track.
5. Pull the spring release handle down.
6. Push up on metal lter and release handle to latch into place.
7. Repeat steps 1-5 for the other lter.
8. Close the panel. Engage the two pins in the spring catches
to secure.
Non-Vented (recirculating) Installation Filters:
The charcoal lter is not washable. It should last up to 6 months
with normal use. Replace with Charcoal Filter Kit. See the
“Accessories” section for information on ordering.
To replace charcoal lter:
1. Cover the grille that covers the blower motor with the
charcoal lter so that the slots on the lter correspond to the
pins on the sides of the motor grille.
2. Turn the charcoal lter clockwise to lock it.
3. Repeat steps 1-2 on the other lter.
Replacing an LED Lamp
The LED lights are replaceable by a service technician only.
See the “Assistance and Service” section for service contact
information.
D
C
B
A
A. Metal lters
B. Stainless steel panel
C. Catch pins (2)
D. Spring catches (2)
A
A. Spring-release handle
A
B
C
A. Charcoal lter
B. Pins
C. Blower motor
Loading ...
Loading ...
Loading ...