Loading ...
Loading ...
Loading ...
TROUBLESHOOTINGCHART
PROBLEM CAUSE CORRECTION
iMower blades will not • Obstruction in clutch • Remove obstruction.
rotate mechanism,
• Worn/damaged mower • Replace mower drive belt.
drive belt.
• Frozen idler pulley,
• Frozen blade mandrel.
Poor grass discharge • Engine speed too slow.
Headlight(s) not
working (if so
equipped)
Battery will not charge
Engine "backfires"
when turning engine
"OFF"
• Travel speed too fast.
• Wet grass.
• Mower deck not level.
• Low/uneven tire air
pressure.
• Worn, bent or loose blade.
• Buildup of grass,
leaves and trash under
mower.
• Mower drive belt worn.
• Blades improperly
installed.
• Improper blades used.
• Clogged mower deck
vent holes from buildup
of grass, leaves, and
trash around mandrels.
• Switchis "OFF".
• Bulb(s) burned out.
• Faulty light switch.
• Loose or damaged
wiring.
• Blown fuse.
• Bad battery cell(s).
• Poor cable connections.
• Faulty regulator (if so
equipped).
• Faulty alternator.
• Engine throttle control
not set at "SLOW"
position for 30 seconds
before stopping engine.
• Replace idler pulley.
• Replace blade mandrel.
• Place throttle control in
"FAST" position.
• Shift to slower speed.
• Allow grass to dry before
mowing.
• Level mower deck.
• Check tires for proper air
pressure.
• Replace/sharpen blade.
Tighten blade bolt.
• Clean underside of mower
housing.
• Replace mower drive belt.
• Reinstall blades sharp edge
down.
• Replace with blades listed
in this manual.
• Clean around mandrels to
open vent holes.
• Turn switch "ON",
• Replace bulb(s).
• Check/replace light switch.
• Check wiring and connec
tions.
• Replace fuse.
Replace battery.
I. Check/clean all connec
tions.
• Replace regulator.
• Replace alternator.
• Move throttle control to
"SLOW" position and allow
to idle for 30 seconds before
stopping engine.
30
Loading ...
Loading ...
Loading ...