Loading ...
Loading ...
Loading ...
9
newair.com
ASSEMBLY INSTRUCTIONS
DO NOT plug in the fan before assembly. This misting fan comes in 3 boxes.
Carefully remove all packing materials and keep for future storage/use. Make
sure there is no residual packaged foam left in any of the components. Check
all the components to ensure no parts are missing, were scratched or damaged
during transportation. A screwdriver and a wrench will be required to assemble
this misting fan.
STEP 1: ASSEMBLING THE STAND POLE
1. Refer to Diagram 1. Locate the tank cart and stand pole.
2. Remove the four M8X25 bolts, spring washer, flat washer, and nuts from
the tank cart.
3. Position the stand pole on the tank cart and make the ball valve switch
face the back.
4. Align the holes on the pole with the four holes on the cart.
5. Using the bolts, washers, and nuts removed in step 1, screw the stand pole
into the tank cart.
6. Make sure the stand pole is securely screwed onto the cart before
proceeding to the next step.
Loading ...
Loading ...
Loading ...