Loading ...
Loading ...
Loading ...
Pressure Washer Rinsing
WARNING! Be extremely careful if you use the
pressure washer from a ladder, scaffolding or
any other relatively unstable location. Pressure
in a running washer builds as you climb. When
you press the trigger, the recoil from the initial
spray could cause you to fall. The high pressure
spray could also cause you to fall if you are too
close to the cleaning surface.
For Rinsing:
• Slide the nozzle backward to high pressure, press
the trigger and wait for the detergent to clear.
NOTE: You can also stop detergent flow by removing
detergent siphoning tube from container.
• Keep the spray gun a safe distance from the area
you plan to spray.
• Apply a high pressure spray to a small area, then
check the surface for damage. If no damage is
found, it is okay to continue cleaning.
• Start at the top of the area to be rinsed, working
down with same overlapping strokes as you used
for washing and applying detergent.
Automatic Cool Down System
(Thermal Relief)
Ifyou run the engineon your pressure washer for
3-5 minutes withoutpressing the triggeron the spray gun,
circulating water in the pump can reach temperatures
between 140-145°F. The automatic cool down system
cools the pump by discharging the warm water onto the
ground, preventing internal pump damage.
OWNER'S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCE SCHEDULE
FILLIN DATES AS YOU COMPLETE
REGULAR SERVICE
MAINTENANCE TASK
PRESSURE WASHER
Check/clean water inlet screen
on quick-connect.
Check high pressure hose.
Check detergent hose.
Check spray gun and assembly for leaks.
Purge pump of air and contaminants.
ENGINE
Check oil level.
Change engine oil.
Service air cleaner.
Service spark plug.
Prepare for storage.
HOURLY OPERATING
INTERVAL
Before Each Every 25
Use Hours or
Yearly
xt
X
X
X
X
X
X*
X**
X
Prepare unit for storage if it is to
remain idle for longer than 30 days.
Every 100
Hours or
Yearly
SERVICE DATES
1 Clean if clogged. Replace if perforated or torn.
* Change oil after the first (2) operating hours and every 25 hours or yearly thereafter. Change sooner when operating under dirty or dusty
conditions.
** Replace more often under dirty or dusty conditions.
Loading ...
Loading ...
Loading ...