Loading ...
Loading ...
Loading ...
ActionPossible causesProblem
If you want the dishwashing
program to continue, press
Start/Stop and close the door
within four seconds.
The dishwasher door has been
opened while a program is in
progress.
"Program paused" is shown on
the display.
If you want to cancel the dish-
washing program, press and
hold Start/Stop for three sec-
onds.
Clean the coarse and fine filters.The filters are clogged.Water remains in the dishwasher
above the filters.
Check that the filter handle is
locked in the stop position.
The filters are not fitted correctly.
Clean the drain pump. See the
chapter Care and maintenance
instructions.
Debris in the drain pump.
Check that the colored stop on
the right in the bottom drain is in
place. See the chapter Care and
maintenance instructions.
Drain pump stop missing.
Check that the hose is free from
kinks and sharp bends.
Kink in drain hose.
Loosen the drain hose from
where it terminates. Check that
no debris has clogged the hose.
Is the cone-shaped part of the
drain boot cut to the maximum
size of the fitting where it attach-
es?
Blocked drain hose.
Clean with dish brush and low
foaming cleaner.
Dirt around the seals and in
corners.
Bad odor in dishwasher.
Run a program with a high tem-
perature once or twice a month.
Or run a self-cleaning program.
See Self-cleaning in the chapter
Using the dishwasher.
Low temperature programs have
been selected for a prolonged
period.
Cleaning the garbage disposer
connected to the dishwasher
can eliminate odors. Follow the
disposer manufacturer's clean-
ing instructions.
The dishwasher is connected to
a garbage disposer.
35
Troubleshooting
Loading ...
Loading ...
Loading ...