Loading ...
Loading ...
Loading ...
ActionPossible causesProblem
See the chapter Settings.Incorrect rinse aid dosage set-
ting.
Spots or films on the dishes.
Switch all-in-one detergents or
deactivate the TAB setting and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.
The TAB setting is activated and
all-in-one detergent with insuffi-
cient drying effect is being used.
Top up with salt. See the chap-
ter Care and maintenance in-
structions.
Salt compartment empty.
See Water hardness in the
chapter Settings.
Incorrect water softener setting.
Check that the salt compartment
lid is properly tightened. Other-
wise call the Customer Care
Center.
The water softener is leaking
salt.
Wash crystal at a low tempera-
ture and with a conservative
amount of detergent. Contact
the detergent manufacturer.
Too high temperature and/or too
much detergent can cause
etching on crystal. Unfortunate-
ly, this cannot be repaired, only
prevented.
Reduce the dosage. See the
chapter Settings. If you have
very soft water, you may want to
dilute the rinse aid 50:50 with
water.
Rinse aid dosage setting too
high.
The dishes have a sticky
white/blue film.
Use a detergent with a bleach-
ing agent.
Lipstick and tea can be difficult
to wash off.
Spots left after washing.
The detergent compartment
must be dry when adding deter-
gent.
The detergent compartment was
damp when adding detergent.
Detergent residue in the deter-
gent compartment after dish-
washing.
Check that the dishes are not
preventing the detergent com-
partment from opening.
The detergent compartment has
been blocked.
Check that the dishes are
placed securely. Spin the spray
arms to make sure they can ro-
tate.
The dishes are not correctly
placed or the spray arms are not
rotating.
Rattling sound when dishwash-
ing.
34
Troubleshooting
Loading ...
Loading ...
Loading ...