Miele WTV 511 – Laundry care accessories

Fitting instructions - Page 14

For WTV 511. Also, The document are for others Miele models: WTV 512

PDF File Manual, 26 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
A Fit the drawer:
A Place the drawer on the plinth drawer rails and close the drawer. The drawer audibly locks into position.
A To ensure that the drawer is correctly located on the rails, open it and close it again.
x
Note
After installation, it may be necessary to adjust the drawer front panel to align it:
Remove the cover caps, Fig. 15, Pos. A.
To adjust the height, turn the adjustment wheels on either side as appropriate, Fig. 15, Pos. B.
To adjust the depth, turn the adjustment screws on either side as appropriate, Fig. 16.
Danger!
Risk of electric shock and risk of damage after dismantling:
When the stacking kit is removed, the washing machine lid is no longer sealed due to the presence of the holes. The
washing machine can no longer be operated safely.
Before the washing machine is used again without the stacking kit, the lid must be sealed using one of the following
methods:
Close the holes in the lid with silicone sealant, or
Fit a new lid on the washing machine. (A new lid can be obtained from the Spares Dept.)
Risk of electric shock when fitting the lid:
Service and repair work should only be carried out by suitably qualified persons in accordance with all appropriate local
and national safety regulations.
Before any service work is commenced, the machine must be disconnected from the mains.
en
fr
Pièces nécessaires
x
Nombre Mat.-Nr. Désignation
09351780 Cadre de superposition lave-linge/sèche-linge WTV 511 (croquis 1)
09351790 Cadre de superposition lave-linge/sèche-linge WTV 512 (croquis 1)
Notice de montage
x
Attention !
Transporter le sèche-linge à pompe à chaleur comme décrit dans croquis 3. Si le sèche-linge n'a pas été transpor
conformément à cette description, prévoir une heure de temps de repos avant de le raccorder au courant. La pompe à
chaleur pourrait sinon être endommagée.
Remarque
La plaque de car ton présente dans le tiroir sert à la fois de sécurité de transport et d'aide de montage. Enlever la plaque
de carton après le montage seulement !
A Dévisser les pieds du sèche-linge et les régler (croquis 4).
A Retourner le cadre avec le tiroir inséré (croquis 5).
A Coller les bagues d'étanchéité (croquis 6).
Produktgruppe 19 Umbau- und Montageanweisung
14 von 26 M.-Nr. 09352090
10.02.2014 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Loading ...
Loading ...
Loading ...