Loading ...
Loading ...
Loading ...
User instructions
22
Do not use table salt, as it contains insoluble substances which, over
time, may damage the water softening system.
The salt container should be refilled when necessary before starting
the wash program. This way, the excess saline solution will be
immediately removed by the water; prolonged presence of salt water
inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
ADJUSTING THE SOFTENER (in some models only)
(available for all programs except the soak program)
The dishwasher is equipped with an electronic control system which
allows the softener setting to be varied to suit the hardness of the water.
To set the softener, proceed as follows.
To access the programming environment it is necessary that the dishwasher
is switched on and the door is open, at this point you must:
press the PROGRAM DELAY button until the H symbol appears
on the display, followed by the number currently set (e.g. H3)
press the PROGRAM DELAY button the number of times
needed to select the right setting level for the hardness of the water
(H0, H1, H2, H3, H4, H5);
N.B.: after few seconds the appliance exits the parameter setting menu
automatically.
Loading ...
Loading ...
Loading ...