Smeg DWAI6D15XT3 60cm Diamond Series Semi Integrated Dishwasher

User Manual - Page 18

For DWAI6D15XT3.

PDF File Manual, 47 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
User instructions
18
DELAYING THE PROGRAM
Allows you to program the dishwasher cycle to start during the required
time period (e.g. night). Press the DELAY button to activate the option. A
delay of 1 hour is shown on the display. Pressing the button repeatedly
will allow you to select the required delay of up to 24 hours. To cancel the
setting, press and hold the button until "0h” appears on the display. The
option cannot be selected once the cycle is running. During programming,
the selected delay is shown on the upper display. The following message
appears on the front display: Start in "X" hours. When the door is closed,
the appliance will prewash the dishes, after which the "program delay" set
will come into effect.
1/2 LOAD FLEXI ZONE
Ideal if just a few dishes need to be washed, allowing energy savings. The
dishes should be placed in both baskets and less detergent should be
placed in the detergent dispenser compared to the amount used for a full
load.
Flexi Tabs
Specifically for washing with combination detergents in tablets, which also
contain salt and rinse aid (3in1) or other agents such as glass protector,
steel rinse aids, etc. (4in1, 5in1…). When this option is selected, salt and
rinse aid will not be dispensed even if the relative compartments contain
them. If the containers are empty, the lights will remain on.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
For further information, refer to the detergent pack.
IMPORTANT:
when no longer required, the option must be deactivated by pressing the
relative
button
(the light goes out).
These products are not suitable for use with excessively “hard” water.
If the hardness level set is higher than H3, when the option is activated
the relative light flashes to indicate that the product is being used
incorrectly; the dishwasher will still work, but washing results may be
poor
.
Loading ...
Loading ...
Loading ...