Loading ...
Loading ...
Loading ...
9
ASSEMBLY INSTRUCTIONS
Restore the power at the main fuse or circuit breaker and
wall switch.
Assembly is complete.
17. INSTALLATION WITHOUT LIGHT KIT (OPTIONAL)
Remove the three switch housing screws from top of
the light kit. Attach the switch housing cap to the switch
housing using the switch housing screws.
Switch
Housing
Cap
Switch
Housing
Screw
2
17
Notch
OPERATING INSTRUCTIONS
1
1. Use the fan reverse switch, located on the switch
housing to optimize your fan for seasonal performance.
Using a ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat setting in
winter without feeling a dierence in your comfort.
In warmer weather, push the reverse switch down which
will result in downward airow creating a wind chill eect.
In cooler weather, push the reverse switch up which will
result in upward airow that can help move stagnant, hot
air o the ceiling area.
Important: Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set either
completely up or down for the fan to function correctly. If
the reverse switch is set in the middle position, the fan will
not operate.
2. The fan pull chain has four positions to control fan
speed. One pull is HIGH, two is MEDIUM, three is LOW
and four turns the fan OFF. The light pull chain has two
positions -- OFF and ON.
Note: When facing the reverse switch, the light pull chain
is on the left and the fan pull chain is on the right.
Reverse
Switch
Reverse
Switch
Light Pull Chain Fan Pull Chain
Loading ...
Loading ...