Loading ...
Loading ...
Loading ...
8
Glass Globe
Pull Chain Extension
Thumbscrew
ASSEMBLY INSTRUCTIONS
16
15
13. Remove the three switch housing screws from the light
kit. Connect the single-pin connectors from the switch
housing to the single-pin connectors from the light kit --
white to white and blue to black. Secure the light kit to the
switch housing using the three switch housing screws.
Note: Align the notch in the light kit with the reverse
switch.
14. Install the E26-base LED bulb into the socket of the
light kit.
Important: Make sure you allow the bulb and light kit to
cool before you replace the bulb.
14
Single-pin
Connector
Bulb
Light Kit
Light Kit
Notch
Reverse Switch
Switch
Housing
Screw
Switch Housing
13
15. Loosen the three thumbscrews near the bottom edge
of the light kit. Lift the glass globe into the light kit and
retighten the previously loosened thumbscrews to secure.
16. Attach the pull chain extension(s) to the pull chain(s).
Note: If installing the fan without the light kit, do not
attach the pull chain extension to the light pull chain.
Loading ...
Loading ...
Loading ...