Loading ...
Loading ...
Loading ...
17
If lint or other debris becomes lodged in nozzle, do not attempt to remove
nozzle cover.
Pour one to two cups of clear water on a non-carpeted floor Do not pour water
onto a wood floor.
Pick up water with your SteamVac
®
carpet cleaner. Repeat as necessary until
debris is flushed out of nozzle.
Some models have a nozzle clean-out tool for removing debris.
5.1 To use the tool: Disconnect carpet cleaner from electrical outlet. Slide tool
into nozzle and remove debris as shown.
To clean the outside of the machine, wipe off dirt with a cloth dampened in warm
water and mild detergent. Do not use solvent or petroleum based products
to clean the machine.
5.1
5. MAINTENANCE
Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure
continued cleaning effectiveness.
Any other servicing should be done by an authorized service representative.
LUBRICATION
The motor is equipped with bearings that contain sufficient lubrication for the life of the motor. The addition
of lubricant could cause damage. Therefore, do not add lubricant to motor bearings.
STORAGE
Before storing:
• Empty Clean Water Solution Tank and rinse thoroughly with clean water.
• Replace empty Clean Water Solution Tank and turn carpet cleaner ON. Squeeze trigger and push
carpet cleaner forward and back several times to expel any solution remaining in the carpet
cleaner’s system. (Do not use carpet cleaner on wood floors.)
• Empty Dirty Water Tank and rinse thoroughly with clean water.
Allow brushes and underside of carpet cleaner to air dry thoroughly before storing carpet cleaner on a
carpeted or wood surface.
Do not store carpet cleaner with a full Clean Water Solution Tank in place.
Actual model may vary from images shown.
NOZZLE: How to Clean
(Tool available on select models only)
Loading ...
Loading ...
Loading ...