Loading ...
Loading ...
Loading ...
OTHER CONTROL FEATURES
Cooling System On/Off Button Alarm Reset Button Indicator Lights
TURNING THE COOLING SYSTEM ON AND OFF
You can disaMe the cooling system in your refrigerator
by pressing the On/Off button located on the left side of
the temperature control panel. To ensure that you do not
accidentally turn off the cooling system, the button does
not work unless you press and hold it for three seconds.
Once you disable the cooling system, all refrigeration to
the freezer and fresh food compartments stops. To turn
the cooling system back on, you must again press and
holdthe On/Off button for three more seconds.
The On indicator light remains offwhile the freezer and
refrigerator compartments cool toward the current cooling
settings. When temperature settings are reached, the On
light displays green to indicate an active alarm system.
RESPONDING TO ALARMS (Audible Tones &
indicator Lights)
Your refrigerator's control system can convey the following
information through audible tones and the alarm indicator
lights.
Alarm Light
panel disabRes your refrigerator's coe!ing system but does On (lightis
off)
must unplug the power cord from the wall outlet,
SYSTEM MONiTORiNG ALARMS (SeUect ModeUs)
The electronic control system continuously monitors
your refrigerator/freezer for temperature consistency,
doors left ajar, and power failures. Variances from
normal operating conditions are communicated by
audible tones and a set of four status indicator lights.
NOTE: Each time you make sett!ngs on the control pane!, Door
a single audible tone acknowledges your input. Ajar
USING THE ALARM RESET BUTTON
You can disable or activate the alarm system by
pressing and holding the Reset button for three
seconds. Use it, for example, to turn off audible tones
and/or flashing indicator lights.
Tone
Condition How To Respond
Alarm system is If freezer and refrigerator
not active while
freezer and
refrigerator
compartments
are cooling
toward the
current
temperature
settings.
compartmentsdo notmatch
yourtemperaturesettingsin
threehours,expectthe
controlsystemto signal other
conditions.If coolingdoes
notstabilizetowardyour
currentsettingscatlfor
assistance,usingthe phone
numberon the backpageof
this Use & CareGuide.
Steady Alarm system is No response required.
Green active.
Flashing _ Freezer or Close door to disable and reset
Green refrigerator alarm.
door has been
open for over
five minutes.
High Flashing _/ Freezer or Press Alarm Reset button to
Temp Amber refrigerator turn off alarm. If
compartment temperatures do not
has been too improve, call for assistance,
warm (7.2° C using the phone number on
or higher) for the back page of this Use &
over an hour. Care Guide.
automaticaimy reset if you disconnect and reconnect
your refrigerator's power cord. It can only be Power
reactivated by pressing the Alarm Reset button.
Once you disable the alarm system, you must again
press and hold the Alarm Reset button for three more
seconds to reset (activate) the alarm system.
Flashing A power outage
Failure Amber was detected.
Press Alarm Reset button to
turn off alarm and press
again to reset. Check if the
power failure lasted long
enough to affect stored food
temperatures.
Loading ...
Loading ...
Loading ...