Loading ...
Loading ...
Loading ...
ELECTRONIC CONTROLS SET-UP iNSTRUCTiONS
Control Set=up Procedures
iMPORTANT: Read all instructions before operating.
The three key pads on the left side, the top key pad on the right
side, and the digital display are used to set up the controls. The
display can contain 4 numbers and/or letters and a decimal point.
These are used to indicate the set-up codes and related code
values available for use in programming the washer.
How to use the key pads to program the controls
1. The LEFT UPPER (POWER WASH) key pad is used to adjust
the values associated with set-up codes. Pressing the key
pad will increment the value.
Rapid adjustment is possible by holding the key pad down.
2. The LEFT MIDDLE (NORMAL) key pad will advance you
through the set-up codes. Pressing the key pad will advance
you to the next available set-up code. Holding the key pad
down will automatically advance through the set-up codes at
a rate of one (1) per second.
3. The LEFT LOWER (DELICATES) key pad is used to select or
deselect options.
4. The RIGHT UPPER (TEMPERATURE) key pad is used to
decrease set-up code value.
Start Operating Set-Up
[] PD Models: insert access door key, turn, and lift to remove
access door.
iMPORTANT: The console must not be opened unless power is
first removed from the washer. To access connector _%_,1:
-_ Unplug washer or disconnect power.
-_ Open console, disconnect plug on _1, close console.
-_ Plug in washer or reconnect power.
The washer is now in the set-up mode.
Before proceeding, it is worth noting that, despite all of the
options available, an owner can simply choose to uncrate a new
commercial washer, hook it up, plug it in, and have a unit that
operates.
Set-up Codes
[] The LEFT MIDDLE (NORMAL) key pad will advance from code
to code.
[] The LEFT UPPER (POWER WASH) key pad will increase the
code value.
[] The LEFT LOWER (DELICATES) key pad will select or
deselect options.
[] The RIGHT UPPER (TEMPERATURE) key pad will decrease
the code value.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
6.06 NORMALRegularCycleVendPrice- Increaseordecrease
NORMAL between0 and200by pressingthe LEFTUPPERorRIGHT
UPPERkeypad. Factorypresetfor6 coins = $1.50.
6.04 DELICATESRegularCycleVendPrice- Increaseor decrease
DELICATESbetween0 and200by pressingtheLEFTUPPERorRIGHT
UPPERkeypad. Factorypresetfor4 coins = $1.00.
6.08 POWERWASHRegularCycleVendPrice- Increaseor decrease
POWERWASHbetween0 and200by pressingthe LEFTUPPERor RIGHT
UPPERkeypad. Factorypresetfor8 coins = $2.00.
-_ Pressthe LEFTMIDDLEkeypad onceto advanceto nextcode.
7.00 ADDITIONALWASHTIME
7.00 Thisis the numberof minutesthatcan beaddedto a WashCycle.
Choosefrom 00-05minutesby pressingthe LEFTUPPERkey
pad.
-_ Pressthe LEFTMIDDLEkeypad onceto advanceto nextcode.
ADDITIONALRINSETiME8.00
8.00 Thisisthe numberof minutesthatcan be addedto a RINSE
Cycle. Choosefrom 00-05minutesby pressingthe LEFTUPPER
keypad.
NOTE:Additionalrinsetimeonly availablein defaultedbath
rinses,not insprayrinseoption.
-> Pressthe LEFTMIDDLEkeypad onceto advanceto nextcode.
9.00 CYCLECOUNTEROPTION
Thisoption is eitherSELECTED'ON' or NOTSELECTED'OFF'.
9.00 NotSelected'OFF'.
9.0C Selected'ON' andnot ableto be deselected.
Pressthe LEFTLOWERkey pad3 consecutivetimesto select
'ON'.Onceselected'ON' it cannotbe deselected.
.e Pressthe LEFTMIDDLEkeypad onceto advanceto nextcode.
1.00 MONEYCOUNTEROPTION
Thisoption is eitherSELECTED'ON' or NOTSELECTED'OFF'.
1.00 NotSelected'OFF'.
1.0C Selected'ON'.
Pressthe LEFTLOWERkeypad 3 consecutivetimesto select
'ON' and3 consecutivetimesto remove(NotSelected'OFF'.)
Counterresetsby goingfrom 'OFF'to 'ON'.
1.C0 Selected'ON' andnot ableto be deselected.
Toselect 'ON' andnot ableto be deselected,first select 'ON',
thenwithintwo secondspressthe LEFTLOWERkey padtwice,
theLEFTUPPERkeypadonce,andexit theset-upmode.
-> Pressthe LEFTMIDDLEkeypad onceto advanceto nextcode.
2.00 SPECIALPRiCiNGOPTION
Thisoption is eitherSELECTED'ON' or NOTSELECTED'OFF'.
2.00 NotSelected'OFF'.
2.SP Selected'ON'. Pressthe LEFTLOWERkey padonceforthis
selection.
if SPECIALPRICINGOPTIONisselected,there is access to codes '3.'
through '9,',
NOTE:An externalbatteryneedsto be addedto keeptheclock runningduring
periodsof power outages.
-> Pressthe LEFTMIDDLEkeypad onceto advanceto nextcode.
17
Loading ...
Loading ...
Loading ...