Loading ...
Loading ...
Loading ...
R While talking on the headphone, you can
switch to the receiver by pressing MTALK/
ZN.
*1 Corresponding headphone number is
indicated next to the item.
Answering calls with your
headphone
During an incoming call, you can answer the
call in the following situations:
n If the headphone is already connected
and it rings:
1 Press MPAIRN or press your
headphone’s button referring to your
headphone’s operating instructions to
answer the call.
2 When you finish talking, press MOFFN
or press your headphone’s button
referring to your headphone’s
operating instructions.
n If the headphone does not ring:
1 Press MTALK/ZN on the handset.
You can also answer the call by
pressing MPAIRN to connect to your
headphone.
R Answered call will automatically be
directed to the speakerphone, since
with some headphones it takes
some time to connect.
R During this time “Connecting” is
displayed on the handset. Go to
step 3.
2 To switch to your headphone, refer
“Switching between the handset and
your headphone”, page 19.
3 When you finish talking, press MOFFN
or press your headphone’s button
referring to your headphone’s
operating instructions.
Note:
R The first ring of an incoming call will not be
heard when using a Bluetooth headphone.
R During an incoming call, press MPAIRN after
receiving Caller ID information to answer
the call and to select headphone listed, if 2
or more Bluetooth headphones are paired.
R Depending on your headphone, it may take
some time to switch the call from the
handset to headphone.
Switching between the handset and
your headphone
You can switch between the handset and your
headphone:
– during a call.
– during an intercom call.
n To switch to your headphone during a
call by the handset:
1 Press MPAIRN on the handset.
R The call is automatically switched
when there is only 1 Bluetooth
headphone is paired and connected.
2 If 2 or more Bluetooth headphones are
paired,
MbN: Select the desired headphone. a
MSELECTN
R The call will be switched if no other
Bluetooth headphone is connected.
R If the selected headphone is other
than the one already connected, the
unit prompts you to disconnect the
Bluetooth connection with the
current headphone a MYESN
n To switch to your handset during a call
by the headphone:
Press MTALK/ZN on the handset.
Note:
R Make sure that the Bluetooth headphone is
not connected to another Bluetooth device.
Adjusting your headphone receiver
volume
Press MDN or MCN repeatedly on the handset
while using your headphone.
Note:
R Depending on your headphone, the
receiver volume may not be adjustable.
Adjusting your headphone ringer
volume
When using your headphone, press MDN or MCN
repeatedly on the handset to select the
desired volume while ringing.
For assistance, please visit http://shop.panasonic.com/support
19
Using Bluetooth® Headphone
Loading ...
Loading ...
Loading ...