Loading ...
Loading ...
Loading ...
EN
W415-2945 / B / 12.22.20
17
6.0 operating instructions
• Ensure the house circuit breakers for the circuit supply are turned on. When initially connecting the appliance to
a power source, the appliance will make a beeping sound to indicate standby mode.
!
WARNING
Once the appliance has been plugged into a grounded electrical outlet or hard-wired to a dedicated
120V power supply, it is ready to operate.
6.1 operating control panel
Power
Turns the appliance on / off.
Temperature
Control
Controls the appliance temperature.
11 Settings:
NOTE: When setting is °C or °F, the temperature control is OFF. Holding the button
for 5s will switch the temperature from °C to °F and vice versa.
Heater
Turns the heater and blower on / off.
3 Settings:
H0 - Heater and blower off
FAN - Blower on
H-1 - Heater on
NOTE: Heater function can be disabled / enabled by holding the button for 5s.
When the heater function is disabled, "LOC" will be displayed. The blower has a 10
second delay after the heater is off to blow out the residual heat.
Flame
Turns the flame effect on / off.
2 Settings:
F-1 - Flame effect on (blue and orange, brightest flames)
F-0 - Flame effect off
ECO Mode
Indicating Light
Indicates the appliance is working under ECO mode (energy saving).
Boost Mode
Indicating Light
Indicates the appliance is working under Boost mode (heat boost).
°C 18 19 20 21 22 23 24 25 26 27
°F 64 66 68 70 72 74 76 78 80 82
Loading ...
Loading ...
Loading ...