Loading ...
Loading ...
Loading ...
5.0 finishing
Multiple media options are provided.
note:
• Power supply service must be completed prior to finishing to avoid reconstruction.
• Heat vents and air openings cannot be covered in any circumstances.
!
WARNING
5.1 crystal installation
1. Remove the glass door (see "installation" section).
2. Place the grate on the media tray. Ensure it is stable.
3. Carefully place an even layer of small crystals on the media tray.
4. Place the logs (left and right) on top of the grate, using the grooves along the bottom of the logs as guides
(Fig. 5-2).
5. Reinstall the glass door.
5.2 log, grate, and crystal installation
1. Remove glass door (see "installation" section).
2. Carefully place an even layer of small crystals on the media tray.
3. Randomly place the large crystals (Fig. 5-1).
4. Reinstall the glass door.
Fig. 5-1
For illustrative purposes only.
Large Crystals
Small Crystals
Fig. 5-2
For illustrative purposes only.
Left Log Right Log
GrateLocating Groove
W415-2945 / B / 12.22.20
EN
16
Loading ...
Loading ...
Loading ...