Craftsman 917387021 rotary lawn mower

User Manual - Page 12

For 917387021.

PDF File Manual, 36 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Shipping position
Medium
low
High.
_X Medium
To change from medium low to high
position only the upper handle section
will have to be turned over.
To change from medium 10wto low
position, only the lower handle Section
will have to be turned over.
Lower handle
Squeeze to
remove
, , - ;i "Mounting
HairPin,ctip' " ' bracket
F.NGINE
mainjet for mixture control, If your eng!ne :
does notOl:e.ra!eproperly due to suspected
carburetor problems, take your lawn mower to
an aathorized service center for repair and
adjustment.
ENGINE SPEED
The enginespeed has been factory set. Do
not attempt to increase engine speed as it
may result in personal injury. If you believe the
engine is running too fast oi"too s!ow,take
your lawn mower to an authorized service
center for repair and adjustment.
Immediately prepare your lawn mower lor
storage at the end ofthe season or ifthe unit
will not be used for 30 days or more.
LAWN MOWER
When lawn mower is to be stored for a period
of time, clean itthoroughly, remove alt dirt,
grease, leaves, etc. Store in a clean, dry area.
Clean entireilawn mower (See "CLEANING"
in the Customer Responsibilities section of
this manual).
o Lubricate as shown in the Customer
Responsibilities section of this manual.
° Be sure that all nuts, bolts, screws_ and pins
are securely fastened. Inspect moving
parts for damage, breakage and wear.
Replace if necessary.
Touch up all rusted or chipped paint
surfaces; sand lightly before painting.
HANDLE
You can fold your lawn mower handle for
storage.
° Squeeze the bottom ends of the lower
handle toward each other until the lower
handte clears the handle bracket, then
move handle forward.
Loosen upper handI6 mounting bolts
enough te allow upper handle to be folded
back.
IMPORTANT: When folding the handle for
storage or transportation, be sure to fold the
handle as shown or you amy damage the
control cables.
° When setting up your handle from the
storage position, the lower handle will
automatically lock into the mowing position.
Lower handle
Squeeze to
remove
Hairpin clip
Operator presence control bar
Uppel
Lift up
Mounting
bracket
Mowing position
Lower handle
12
Loading ...
Loading ...
Loading ...