Loading ...
Loading ...
Loading ...
ProbJern
Pumphas following problems:failure
to producepressure, erratic pressure,
chattering,loss of pressure, low water
voJurne.
Unit fails to start when spraygun
trigger is squeezed.
Detergent faiJsto mix with spray.
Cause
1. Water inlet is blocked.
2. inadequatewater supply.
3. Gardenhose is kinked or leaking.
4. Cloggedwater inlet screen.
5. Water supply is over IO0°F (38°C).
6. High pressure hose is blocked or
leaks.
7. Nozzleis obstructed.
8. Pump is faulty.
1. Water supply is not turned on.
2. Unit is not turned on.
3. Gardenhose is too long.
1. Siphon tube is clogged or cracked.
2. Siphon tube is loose or
disconnectedfrom tube connection
of foam lance.
3. Wand adjustment setting is
incorrect.
Correction
1. Clear inlet.
2. Provide adequatewater flow.
3. Straighten garden hose or replace if
leaking.
4. Checkand clean water inlet screen.
5. Provide cooler water supply.
6. Clear blocks in high pressure hose
or replace hose.
7. CleanNozzle.
8. ContactSears service facility.
1. Turn on water supply.
2. Pressthe master ON/OFFswitch to
the Pressure WasherON position
(I). Reset GFCI.
3. Useonly 50 ft. (15.24 m) maximum
garden hose.
1. Cleanor replacesiphon tube.
2. Connect siphon tube securely onto
tube connection of foam lance.
3. Adjust wand setting as instructed in
Applying Detergent.
18
Loading ...
Loading ...
Loading ...