Loading ...
Loading ...
Loading ...
• Place the clutch-brake pedal in park position.
• Push forward on the variable speed pulley, lift the
belt off the engine pulley, and remove the belt from
the pulley.
• Release the clutch-brake pedal. Using the pedal to
move the variable speed pulley as necessary, lift
the belt up and off the variable speed pulley.
NOTE: When reassembling, make certain belt is inside
the belt keeper pins. See Figure 23.
tlVa2, b,e
Speed Pulley
Pins
, . AI
Figure 28
SECTION9: OFF-SEASONSTORAGE
If the machine isto be inoperative for a period longer
than 30 days, prepare for storage as follows.
• Clean the engine and the entire unit thoroughly.
• We do not recommend the use of pressure
washers or garden hose to clean your unit. They
may cause damage to electric components,
spindles, pulleys, bearings or the engine. The use
of water will result in shortened life and reduce
serviceability.
• Lubricate all lubrication points. Wipe the entire
machine with an oiled rag to protect the surfaces.
• Refer to the engine manual for correct engine
storage instructions. The engine must be
completely drained of fuel to prevent gum deposits
from forming on essential carburetor parts, fuel
lines and fuel tanks.
Charge battery fully. The battery loses some of its
charge each day when the unit is not used.
NEVER store battery without a full charge. Recharge
battery before returning to service or every two months,
whichever occurs first.
• When storing unit for extended periods, disconnect
battery cables. Removing battery from unit is
recommended.
• Store unit in a clean, dry area. Do not store next to
corrosive materials, such as fertilizer.
NOTE: When storing any type of power equipment in
an unventilated or metal storage shed, care should be
taken to rustproof the equipment. Using a light oil or
silicone, coat the equipment, especially any chains,
springs, bearings and cables.
23
Loading ...
Loading ...
Loading ...