Loading ...
Loading ...
Loading ...
Electronic Control Settin s 2,5
USERPREFERENCES
[] [] [] [] [] Ill [] [] I! [] [] [] [] [] [] [] [] [] [] [] [] []
The User Preferences menu includes all user defined options. This feature enables you to
control the various options of the electronic controls. This menu features the Time of Day,
Celsius or Fahrenheit display mode, Continuous Bake or 12 Hour Energy Saving modes, Clock
display or No-Clock display, 12 Hours Time of Day or 24 Hours Time of Day, Audio Control,
and Adjusting the oven temperature. The User Preferences menu is only available when the
oven is not being used (not cooking).
To browse through the User Preferences menu
1. Press USER PREF _(_ to bring up the User Preferences menu.
2. Press USER PREF ,_ again to browse through the menu pages.
+
3. Press hi or io to ttoggle between the available options.
4. Press START _ while the chosen option is on display to change.
5. Press CANCEL @ when finished to get back to the standard oven display.
User Preferences menu items:
• CLO 12:00; Setting the clock.
• CLO on; Clock on!off.
. CLO 12hr; 12/24 hour time of day display.
• F-C F; Fahrenheit / Celsius display.
• E S on; 12 hour Energy Saving on/off.
• AUdl Audio on!off and volume.
• UPO; Adjusting oven temperature.
• rSt; Reset to default factory settings
SETTWNGTHE CLOCK °TIME OF DAY
The clock may be set for 12 or 24 hour time of day operation (see advanced settings section).
The clock has been preset at the factory for the 12 hour operation. When the range is first
plugged in, or when the power supply to the range has been interrupted, the display will show
"CLO 12:00". The clock must be set before the oven can be used.
When power to the unit has been interrupted, "12:00" appears and flashes in the display. To
set the Clock in this case, skip step 1 in the example below and follow steps 2 and 3.
To set the clock (example for 1:30)
1. Press USER PREF _ until you get to the CLO 12:00 menu page.
2. Press _,1_:(,,3_) pads to set the time of day to 1:30. The pads hi or |o can also be
pressed to raise or lower the actual time displayed.
3. Press START _ to accept the changes and go back to user preferences menu display.
4. Press CANCEL @ when finished to get back to the standard oven display.
SETTINGCLOCK DISPLAY-- ON OR OFF
The oven control can be programmed to display the time of day or not. The oven has been
preset at the factory' to display the time of day.
Changing clock display between ON and OFF
1. Press USER PREF _(_ until you get to the CLO on menu page.
4-
2. Press Io or hi to toggle between displaying or hiding the clock.
3. Press START I_ to accept the changes and go back to user preferences menu display.
4. Press CANCEL @ when finished to get back to the standard oven display.
Loading ...
Loading ...
Loading ...