Loading ...
Loading ...
Loading ...
1.Twist,thenpulloffsparkplugboot.
2. Removesparkplugfromcylinder
anddiscard.
3. ReplacewithChampionRCJ-6Y
sparkplugandtightensecurely
witha3/4inchsocketwrench.
4. Reinstallthesparkplugboot.
Yourunitisequippedwithabump
feedtrimmerhead.Abonusfixed
linecuttingheadisalsoincluded.
Bothcuttingheadscanbeused
interchangeably(seeCHANGINGTHE
TRIMMERHEADsectionforremoval
andinstallationinstructions).
LINE REPLACEMENT
BUMP FEED TRIMMER HEAD
1. Align arrows on green tap button
with line exit holes on side of trim-
mer head.
Button
Arrow on Green Tap
Line exit hole .... _'-'__
2. Remove any remaining line
from trimmer head by pulling on
line in center of green tap button.
3. Clean entire surface of trimmer
head.
4. Replace line using a 15 feet (4.5
meters) length of 0.095 inch (2.4
mm) diameter Craftsman brand
line (#71-85904).
_WARNING: Never use wire,
rope, string, etc., which can break off
and become a dangerous missile.
5. Insert both ends of the line through
the holes in the center of the green
tap button.
_reen Tap Button
6. Pull ends of line and make sure
the line is against the green tap
button and extended evenly
through the line exit holes on both
sides of the trimmer head.
\,
__-,,,, Line against the
Green Tap Button
\ //" /
7,
Rewind line to desired length by
turning green tap button in clock-
wise direction (as shown on trim-
mer head).
12
Loading ...
Loading ...
Loading ...