Loading ...
Loading ...
Loading ...
The optimum temperature and air quality
27
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the ex-
ternal temperature should fall, a heater
element switches on automatically to
keep the temperature inside as constant
as possible. If the ambient temperature
continues to fall, the appliance switches
itself off automatically.
Setting the temperature
Use the two sensors underneath the
display to set the temperature.
By touching the sensor
- The temperature decreases.
- The temperature increases.
Touch the OK sensor to confirm your
selection
or
wait approximately 5 seconds after
the last touch of a sensor.
The temperature being set will flash in
the display.
The following information shows in the
display while the sensors are being
touched:
- Touching a sensor once: the last
temperature selected flashes.
- Each subsequent touch of the
sensor: adjusts the temperature
shown in 1°C increments.
- Leaving a finger on the sensor
changes the temperature continu-
ously.
A tone will sound (if the sensor tone
is switched on) when the lowest or
highest possible temperature is
reached.
Approximately 5 seconds after the last
time a sensor has been touched, the
current temperature inside the wine
conditioning unit is automatically
shown.
When the temperature is altered, there
is a short delay until the temperature
selected is set.
The temperature display on the control
panel always shows the actual tem-
perature.
Loading ...
Loading ...
Loading ...