Loading ...
Loading ...
Loading ...
The correct temperature
29
Temperature display
In normal operation the temperature
display shows the required temperat-
ure.
Setting the temperature
Use the and sensor controls on
the control panel to set the temperat-
ure.
- Every touch of the sensor control ad-
justs the temperature shown in 1°C
increments.
- Keeping a finger on the sensor con-
trol changes the temperature continu-
ously.
Once you have adjusted the temperat-
ure, wait for approx. 6hours if the re-
frigeration appliance is not very full
and for approx. 24hours if the refri-
geration appliance is full before
checking the temperature display. It will
take this long for the appliance to give
an accurate reading.
If, after this time, the temperature is still
too high or too low, you will need to ad-
just it again.
Possible temperature settings
- Fridge zone: 2to8°C
- Freezer zone: -16to-24°C
If you change the temperature set-
ting:
check the temperature display after a
few hours. It will take this long for the
appliance to give an accurate read-
ing.
- Wait for approx.6hours if the refri-
geration appliance is not very full
- Wait for approx.24hours if the refri-
geration appliance is full
If, after this time, the temperature is still
too high or too low:
Adjust the temperature again.
Loading ...
Loading ...
Loading ...