Loading ...
Loading ...
Loading ...
W415-3033 / 03.15.22
EN
14
remote control layout
5.4 temperature display
5.5 fl ame height
5.6 blower speed
5.7 night light dimmer control
5.8 in the event of a power failure
note:
Your new fi replace includes a night light that allows you to enjoy the appearance of your fi replace when the
fl ames are not on.
note:
Please note the night light is not designed to be in used whilst the fi replace is burning. The fi replace, logs, and
fl ame have been designed to produce the most aesthetically appealing look without the need of the night light.
If the night light is used at the same time as the fi replace is burning, the life time of the night light bulb will be
signifi cantly reduced and the need to replace the bulb will become more frequent.
A. With the system in the off position, press the temperature key
and the mode key at the same time to change from degrees ºF to
ºC.
B. Look at the LCD screen on the transmitter to verify that a ºC or ºF
is visible to the right of the room temperature display.
The remote control has six (6) fl ame levels. With the system on and the fl ame level at the maximum, press the
down arrow key once and it will reduce the fl ame height by one step until the fl ame is turned off.
The up arrow key will increase the fl ame height each time it is pressed. If the up arrow key is pressed while
the system is on but the fl ame is off, the fl ame will come on at the high position. A single “beep” will confi rm
reception of the command.
If the appliance is equipped with a hot air circulating fan, the speed of
the fan can be controlled by the remote system. The fan speed can be
adjusted through six (6) speeds.
A. Use the mode key to guide you to the fan control icon.
B. Use the up/down arrow keys to turn on/off or adjust the fan
speed. A single “beep” will confi rm reception of the command.
When the desired blower speed is selected, the blower will automatically come on 5 minutes after the main
burner has been turned on and remain on twelve minutes after it has been turned off.
note:
When the desired blower speed is selected, the blower will automatically come on 5 minutes after the main
burner has been turned on and remain on twelve minutes after it has been turned off (thermostat mode only).
T
he auxiliary function controls the
AUX
power outlet on the control module
which controls the Night Light™.
A. Use the mode key to guide you to the AUX icon.
B. Pressing the up arrow key will activate the Night Light™.
C. Pressing the down arrow key will turn the Night Light™ off. A single
“beep” will confi rm the reception of the command.
If the receiver is equipped with batteries they will enable fl ame height control or on/off function to control the
appliance during a power failure. Blower and Night Light™ operation is not possible. Refer to “appliance
operation” section when communications between receiver and transmitter have been lost. The receiver will
emit a “beep” sound to confi rm programming has been successful once power is restored. During a power
failure, if the appliance was on, the fl ame height will stay at the setting prior to the failure. If off when the failure
occurs and then turned on, the fl ame height will come on at “Hi”
. The fl ame height can then be controlled by the
remote.
Loading ...
Loading ...
Loading ...