Loading ...
Loading ...
Loading ...
Replaceable components of the tank assembly
include the cap assembly, cap gasket and poppet
valve.
B Cap assembly
1. Twist off to remove. (Fig. 2)
Fig. 2
Fig. 2
2. Slide gasket off to replace. (Rib on gasket faces
toward cap.)
C. Poppet valve
1. Insert screwdriver through tank opening
and push valve until it snaps out of seat. (Fig. 3)
Fig. 3
Fig. 3
2. Work valve stem out of tank from underneath.
3. The spring, brass washer and valve seat will stay
trapped in the valve seat. Remove through tank
opening.
Note positioning in Fig. 3A.
SPRING-._/_
WASHERT_ _'
VALVE SEAL'_t_
Fig. 3A VALVE STEM "'_ ._
The cupped end of the valve seal faces downward
upon reassembly.
To reassemble valve:
1. Slide valve assembly into valve seat through
opening in bottom of tank. (Fig. 4) Use a small
amount of soap on seal to case assembly.
2. With small screwdriver, work rubber washer into
With £mnll £nr#wttrivnr wnrk rllhh#r
housing. (Fig. 5)
3. Continue to slide shaft in until it stops.
Fig. 5
4. Valve should spring open and closed when
fully seated.
D. Upper handle assembly
1. Remove two bolts and slide handle off. (Fig. 6)
Loading ...
Loading ...
Loading ...