Loading ...
Loading ...
Installing the built in oven
Positioning the appliance
Ensure that the aperture that you will be fitting
the oven into, is of the size given in the
diagram.
The oven must be fitted into an oven housing
with the ventilation cut-outs shown in the
“Ventilation requirements” section below
Ensure that the rear panel of the furniture
housing unit has been removed.
Cooling fan
A tangential cooling fan is fitted inside of this
appliance, to make the internal temperature
of the oven stable and the external surface
temperature lower. After the oven has been
used the cooling fan will run on for a period
of time, until the oven is sufficiently cooled.
Ventilation requirements
(Figure shows the ventilation and cut-out requirements
for the installation of the appliance into a standard
kitchen unit).
(Figure shows the ventilation and cut-out requirements
for the installation of the appliance into a tall housing unit).
Fastening the oven
Insert the appliance into the
compartment; open the oven
door and fasten the oven to
the cabinet using the four
screws “A”, remembering to
place the special spacers
provided between the hole
and the screw itself.
3
Loading ...
Loading ...
Loading ...