KSTAT10-2HC User Manual

Loading ...

This units increased performance characteristics result from having two rear air intakes.

It is very important that these installation instructions are followed so your unit can operate at

maximum efficiency.

If this is an existing sleeve, and there is an existing rear grille, it needs to be r eplaced by one that

has been shipped with the unit in the accessory kit.

Installation of new grille provided with unit

1. Remove the existing grille.

2. Place the grille included with the new air conditioner towards the rear of the sleeve.

3. Mark through the hole positions.

4. Drill through the sleeves flanges with a 1/8 drill bit.

5. Attached the new grille with self-threading s crews and washers.

6. It is VERY IM PORTANT that the grill e is plac ed exactly as shown below.

7.Most decorative exterior grilles m ay be left in place as long as the proper interior air direction grille

is installed.

FOR INCREASED EFFICIENCY,UTILIZE THE PROVIDED LOUVERED REAR PANEL

INSTALLATION INSTRUCTIONS

IMPORTANT

Loading ...

Keystone KSTAT10-2HC 10,000 BTU 230V Through-The-Wall Air Conditioner | 10,600 BTU Supplemental Heating | LCD Remote Control | Sleep Mode | 24H Timer | AC for Rooms up to 450 Sq. Ft. |