Loading ...
Loading ...
Loading ...
The Emergency Override Switch is
located just below the main control
panel next to the power inlets
For normal operation the switch is in the
“NORMAL USE” position. If the electronics
in the display board fail or controls become
non-functional, slide the switch to
EMERGENCY OVERRIDE position.
NOTE:
• In EMERGENCY OVERRIDE, the cooler runs
with full cooling capacity (i.e. will chill as
heavily as possible with no regard to the
set temperature) and may freeze.
• The compressor will run continuously for
8 hours before going into a hibernation
mode.
The second DC socket
on the back side
allows the optimal use in every position.
Here you also nd the serial number of
your device.
How to clean your unit:
• Clean the appliance inside and outside with a clean damp cloth every week.
If it is dirty, use sodium bicarbonate dissolved in lukewarm water to clean the unit.
• Please don’t use abrasive products, detergents, soap or hard objects to clean as these can
damage your refrigerator.
• After cleaning, wipe out with a clean damp cloth and dry carefully.
• Never clean the unit under running water or in dish water.
• Do not store products inside unit if the unit is o.
• Do not store the unit if it is wet inside or without leaving the lid open.
page 8
Cleaning & Maintenance
CCP FRIDGE·FREEZER
Emergency Override
Fuse
6.3A
Loading ...
Loading ...
Loading ...