Loading ...
Loading ...
Loading ...
3. Remove the small yellow drain pump access cover at
the left of the bottom drain (see illustration below).
4. By inserting your finger into the hole, you can turn the
pump blades to release anything blocking the pump.
5. Reinstall the access cover and filters.
6. Plug the machine in again.
If the dishwasher still does not start and a whirring
sound is heard, the overflow protection has been
triggered.
• Shut off the water.
• Unplug the unit from the power outlet.
• Call the Customer Care Center.
NOTE!
Do not forget to reinstall the drain pump access cover.
Lower spray arm
Holes and bearings can sometimes become blocked.
1. Pull the lower spray arm straight up to release it.
2. Remove any debris using a needle, toothpick, or some
other similar pointed device. The spray arms also have
holes underneath.
Upper spray arm
1. Pull out the basket.
2. Unscrew the spray arm bearings as illustrated to
remove the spray arm from the upper basket.
Spray arm bearings
3. Clean the upper spray arm in the same manner as the
lower spray arm.
4. Replace the spray arm and screw the spray arm
bearings firmly back into place.
Cleaning the inside of the machine
The dishwasher tub is made of stainless steel and is kept
clean through normal use. However, if you have hard
water, limescale deposits may form in the dishwasher. If
this happens, run the Platters & Pans program with high
temperature and two tablespoons of citric acid or
commercially available dishwasher cleaner in the
detergent compartment (with no dishes in the machine).
Customer Care Center24
1-800-898-1879
www.askousa.com
Care and maintenance instructions
Loading ...
Loading ...
Loading ...