Loading ...
Loading ...
Loading ...
6
Select options
To select an option, press one of the option
buttons. The field under the button lights when the
option is activated. The available options depend on the
selected program. Once you have started the program,
the options you selected are saved for the next time you
use the same program. An exception is the Delayed start
option.
High temperature
Activate this option for improved dishwashing results. The
machine then uses a higher temperature for the main
wash. This option cannot be activated if the Time saver
option is selected.
If you want to use the lower temperature, press again so
that the field under the button turns off.
You can vary the temperature as shown below:
130 °F (55 °C)/ 160 °F (70 °C)Platters & Pans:
130 °F (55 °C)/ 150 °F (65 °C)Normal wash:
140 °F (60 °C)/ 150 °F (65 °C)Everyday ware:
85 °F (30 °C)/ 140 °F (60 °C)Quick wash:
85 °F (30 °C)/ 140 °F (60 °C)Refresh wash:
105 °F (40 °C)/ 120 °F (50 °C)Glass wash:
120 °F (50 °C)/ 140 °F (60 °C)Eco wash:
Long dry
A higher temperature in the final rinse and a longer drying
phase improves the drying result if you activate the Long
dry option. This causes a slight increase in energy
consumption. This option can be used with all programs
except Time program, Rinse & Dry, and Rinse & Hold.
This option cannot be activated if the Time saver option
is selected.
If you want a program with Short dry, press again so that
the field under the button turns off.
Delayed start
When you select Delayed start, the dishwasher will start
1-24 hours after you press the Start/Stop button.
1. Press the button once to activate Delayed start. Press
the button several times – or hold it in – to set the
desired number of hours.
2. Press Start/Stop and the dishwasher counts down 1
hour at a time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want
to cancel the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the
program.
Set time
Press the option button several times – or hold it in – to
set the desired program time for Time program. You can
choose a program time between 30 minutes and 3 hours.
Time saver
This option shortens the program time, but uses more
energy and water. This option can be selected with the
Platters & Pans, Normal wash, and Everyday ware
programs.
7
Press Start/Stop and close the
door
The display flashes three times with the remaining
time to indicate that the program has started. Close the
door properly, otherwise the dishwasher will not start. The
display indicates
if the door is open.
NOTE!
If the machine does not start within 2 minutes of the last
button press, the display returns to showing the last
program run.
Stopping or changing a program
If you want to change programs after starting the
dishwasher, open the door then press and hold Start/Stop
for three seconds. Add more detergent if the lid of the
detergent dispenser has opened. Then choose a new
program, press Start/Stop, and close the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically. Add
the dishes, close the door, and the dishwasher resumes
the program.
Customer Care Center18
1-800-898-1879
www.askousa.com
Dishwashing
Loading ...
Loading ...
Loading ...