Loading ...
Loading ...
Loading ...
Reversing the Door Swing of Wine Cooler
This appliance has the capability of the door opening from either the left or right side. The unit is delivered to
you with the door opening from the left side. Should you desire to reverse the opening direction, please follow
the instructions below:
Important
All parts removed must be saved to allow the door swing to be reversed.
1. Disconnect the power and take out all the wines. Carefully lay or lean the wine cooler on its back. Use
cushioning to protect the floor and the wine cooler.
2. Open the glass door and remove the two lock screws (2) holding the door shaft assembly (3) to the glass
door. Before careful to hold the glass door firmly after removing the screws. (Fig.1).
3. Lift up the removed glass door and place it on a padded surface to prevent scratching it.
4. Remove the two screws from the door bottom at right side and install them to the door bottom at left
side. (Fig.3)
5. Use the new bottom hinge provided in the plastic bag inside the wine cooler and installs it at the
designated position on the left side, and installs the door shaft (3) assembly accordingly. (Fig. 2)
6. Remove the upper hinge cover (4) and remove the four screws (5) that are used to fix the upper hinge
(6) to the cabinet top. Then remove the upper hinge and install it at the designed position on the left side
(Fig. 4)
7. Set the glass door into the designated position and install the lock screws (2) to connect the door shaft
assembly with the glass door and tighten them before the door is leveled. (Fig.5)
8. Remove the handle from the left side of the door and install it on the right side.
Loading ...
Loading ...
Loading ...