Loading ...
Loading ...
Loading ...
6
2.Fix the wall hanging brackets to the wall securely (eg. into the stud).
If the studs are too far apart, fit a timber slat to the studs then mount the
brackets onto the slat. The distance between each is 553 mm as per
diagram (Fig.1).
Wood screw
553 mm
3. Keep the exhaust grill at front of the dryer, then install the hooks
to the dryer, in the inverted position. Remove the 2 screws and
2 plastic plugs as indicated in Fig.2.
Fig.1
2 plastic plugs
2 screws
Fig.2
4. Align the hooks as shown in fig.3 and refit screws tightly. Install the
spacers provided in Fig.3.
2 hooks
3 screws
2 spacers
Fig.3
Warning: Ensure that the screw and nut of the Wall Hanging Brackets are
tightened during installation, if required. Regularly check all the
screws and nuts and tighten, if required. Do not overtighten.
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...