Loading ...
Loading ...
Loading ...
18
Fig. 5.1
VITROCERAMIC SURFACE
Before cleaning the top, make sure that it is switched off.
Remove any encrustation using a special scraper which can be bought (fig. 5.1).
Remove dust using a damp cloth.
Detergents can be used as long as they are not abrasive or corrosive.
All residues of detergent must be eliminated with a damp cloth.
Keep all objects that could be melted by the heat away from the top: plastic objects,
aluminium foil, sugar or sugary products.
If an object melts on the top, remove immediately (while the top is still hot) using a
special scraper to avoid permanent damage to the pyroceram surface.
Avoid using knives and pointed objects as they could damage the surface of the top.
Also avoid using abrasive sponges or wire wool which can permanently scratch the
pyroceram surface.
ATTENTION: MOST IMPORTANT!
If cleaning the glass ceramic hob using a special scraper tool take extra care to
avoid damaging to the seal at the edges of the glass ceramic surface.
5
OVEN FITTING OUT
• Assemble the wire racks to the oven walls using the 2 screws (g. 5.2).
• Slide the rack into the runners (g. 5.3).
The rack must be tted so that the safety notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be at the back.
• To dismantle, operate in reverse order.
Guard rail Stop notch
Fig. 5.3
Fig. 5.2
Loading ...
Loading ...
Loading ...