Loading ...
Loading ...
Loading ...
14
Description of the illuminated symbols:
AUTO flashing - Programmer in automatic position but not programmed
AUTO always lighted - Programmer in automatic position with programme inserted.
Automatic cooking taking place or oven in manual mode.
Timer in operation
and AUTO - flashing - Programme error.
(The time of day lies between the calculated cooking start and end time).
Note: Select a function by the respective button and, in 5 seconds, set the required time
with the
/ buttons (“one-hand” operation).
A power cut zeroes the clock and cancels the set programmes.
The electronic programmer is a device which groups together the following functions:
• 12 hours clock with illuminated display
• Timer (up to 23 hours and 59 minutes)
• Program for automatic oven cooking
• Program for semi-automatic oven cooking
Description of the buttons:
Timer
Cooking time
End of cooking time
Manual position and cancellation of the inserted cooking program
To increase the numbers on the digital display
To decrease the numbers on the digital display.
ELECTRONIC CLOCK (fig. 4.2)
The programmer is equipped with an electronic clock with lighted numbers which
indicate hours and minutes.
Upon immediate connection of the oven or after a blackout, “12:00” will flash on the
programmer panel.
To set the hour it is necessary to push the
button and then the or
button until
you have set the exact hour (fig. 4.2).
Alternatively, simultaneously push the
two buttons and then the or
button.
Note: Setting the clock deletes any programme.
NORMAL COOKING WITHOUT THE USE OF THE
PROGRAMMER
To manually use the oven, that is, without the aid of the programmer, it is necessary to
cancel the flashing AUTO by pushing the button
(AUTO will be switched off and the
symbol will go on - fig. 4.3).
Attention: If the AUTO is not flashing (which means a cooking programme has already
been inserted), by pushing the button
you have cancelled the programme and
switched to manual.
The oven shall be switched off manually.
how to use the electronic programmer
4
Fig. 4.2
Fig. 4.1
Fig. 4.3
During a semi-automatic or
automatic oven cooking program,
once completed the programming
procedure the oven lamp/s will be lit
until the end of the cooking program.
This means that, in case of delayed
cooking start, the oven lamp/s will
remain always lit.
In addition, if a fan assisted semi-
automatic or automatic oven cooking
program is set, further to the oven
lamp/s also the oven fan motor (the
motor inside the oven cavity) may be
operating (together with the cooling
fan motor) before the start of the
cooking program; this is possible if
the oven or cooktop has been used
previously and the range is still hot/
warm.
Loading ...
Loading ...
Loading ...