Loading ...
Loading ...
Loading ...
4
NOTES ON LOCATION:
In order to get the most effective use from your humidifier, it is important to position
the unit where the most humidity is needed or where the moist air will be circulated
throughout the house such as near a cold air return. If the unit is positioned close to
a window, condensation may form on the window pane. If this occurs the unit should
be repositioned in another location.
Do NOT position the unit directly in front of a hot air duct or radiator. Do NOT place
on soft carpet.
Due to the release of cool, moist air from the humidifier, it is best to direct air away
from thermostat and hot air registers. Position humidifier next to an inside wall on a
level place at least 4 inches away from the wall or curtains.
ASSEMBLY
1) Unpack humidifier from carton.
2) Remove all packaging materials. Check to see that you have all of the following
items removed from the box, accessory kit and cabinet before discarding the
packaging:
Evaporative wicking filter
Manual
WATER FILL
CAUTION: Before filling, ensure unit is turned OFF. Keep grille dry at all times.
WARNING: To reduce the risk of fire or shock hazard, DO NOT pour or spill water
into control or motor area. If controls get wet, let them dry completely and have unit
checked by authorized service personnel before plugging in.
1) After the humidifier is positioned where it will
be operating you are ready to fill the
humidifier. The bottle lifts straight up and
away from the base. Take care not to bump
or damage fill valve assembly on the bottom
of the bottle.
2) Invert the bottle. Press the valve stem button
into the bottle and turn clockwise to lock in
open position. Place bottle under the faucet.
Fill the bottle, being careful not to allow any
debris to get in the bottle. Debris may
interfere with the valve seating.
3) Once the bottle is full, press the valve stem
button and turn counter clockwise to release
and close.
a.
b.
c.
Loading ...
Loading ...
Loading ...