Loading ...
Loading ...
Loading ...
12
Setting and maintaining proper temperatures
If freezer or refrigerator is too cold:
➢ Change control to next lowest
number.
If freezer or refrigerator is too warm:
➢ Change control to next highest
number.
Food storage
FRESH FOOD STORAGE
➢ The fresh food compartment of a
refrigerator should be kept between
34° F and 40° F with an optimum
temperature of 37° F. To check the
temperature, place an appliance
thermometer in a glass of water and
place in the center of the refrigerator.
Check after 24 hours. If the
temperature is above 40° F adjust the
control.
FROZEN FOOD STORAGE
➢ The freezer compartment of a
refrigerator should be kept at
approximately 0° F. To check the
temperature, place an appliance
thermometer between the frozen
packages and check after 24 hours. If
the temperature is above 0° F, adjust
the control.
LOCK
UNLOCK
WATER
CRUSH
CUBE
ON/OFF
DISPENSER
LIGHT
LIGHT
SENSOR
FILTER
CHANGE
GOOD
MAX
FREEZE
CONFIRM
SETTINGS
TEMP SET
ON
OFF
TEMP SET
MAX
COOL
DISPLAY
ON/OFF
ALARM
OFF
VACATION
MODE
This refrigerator is designed to operate at a household temperature of 55° to 100° F (13° to 43° C).
Electronic Temperature Control
Dial
Temperature
Control
Initial control settings
DIAL CONTROLS
1. Locate refrigerator
and freezer control
on upper-left wall of
fresh food section.
2. The manufacturer’s
recommendation
setting for both
compartments is 3
1
⁄2.
3. Let the refrigerator run at least 8 to
12 hours before adding food.
4. Allow 24 hours for temperature to
stabilize.
ELECTRONIC CONTROLS
1. To set temperature of the freezer, use
the buttons next to the
button.
➢ Use the to raise the
temperature of the freezer section,
or the to lower it.
➢ Press the button to confirm
the settings.
2. To set temperature of the fresh food
section, use the buttons next to
the button.
MAX
COOL
TEMP SET
CONFIRM
SETTINGS
ON
OFF
MAX
FREEZE
TEMP SET
ON
OFF
➢ Use the button to raise the
temperature of the fresh food
section, or the button to lower it.
➢ Press the button to confirm
the settings.
3. Allow 24 hours for temperatures to
stabilize.
NOTE:
➢ The temperature display on the LED
screen may fluctuate after being set
as the refrigerator cycles to maintain
the set temperature.
How to adjust the
temperature controls
After 24 hours from adding food, you
may decide that one or both
compartments should be colder or
warmer. Follow the instructions below
for proper temperature adjustment.
NOTE:
➢ Due to design of refrigerator, always
start temperature adjustments with
freezer section.
➢ DO NOT change either control more
than one number at a time.
➢ Allow 5–8 hours for temperatures to
stabilize.
➢ Changing either control will have
some effect on the temperature of the
other compartment.
CONFIRM
SETTINGS
Loading ...
Loading ...
Loading ...