Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
8
Definition of the Door Panel Heights
The freezer door height is 25-1/4"(642mm). In order to cover the lower part of the appliance increase the height of the panel to 26-
5/8"(675mm).
To cover the face side of the floorboard (a) add the thickness of the floor board (usually 3/4"(19mm). Thus, the minimum height of
the freezer door panel is: 26-5/8"+3/4"=27-3/8" (675mm+19mm=694mm).
Without door panels on the unit, there is a gap of 1-7/8" (50mm) between the freezer door and the refrigerator door. After the
installation of the cabinet doors, the gap between the two doors will only be around 1/8"(3mm).
If there is other furniture standing close to the refrigerator cabinet this furniture typically has a gap between two drawers or two
doors. Depending on your kitchen, these gaps are approximately 1/8"(3mm) wide.
In this case, the maximum height of the freezer door panel is:26 -5/8"+3/4"+1 -7/8"-1/8"=29 -1/8" (675mm+ 19mm+50mm-3mm=
741mm). Where as the minimum height of the freezer door panel is: 26-5/8"+3/4"=27-3/8" (675mm+19mm=694mm). The final
door height depends on the gap position of the cabinets that stand to the left and right of the refrigerator cabinet.
The height of the refrigerator door panel is: The total opening of the cabinet ( 69-3/4"(1771mm)) plus the thickness of the top as
well as the floor board (usually 3/4” (19mm) minus the height of the freezer door panel (xxx"(xxxmm)) and subtract the width of the
gap(approximately 1/8"(3mm)): 69-3/4"+3/4 +3/4 -xxx-1/8 =71-1/8"-xxx (1771mm+ 19mm+ 19mm-xxx mm-3mm= 1806mm-XXX )
Start with the lower door of the freezer compartment: " " " " mm
Loading ...
Loading ...
Loading ...